ZyXEL Communications VES-1012 - Guia do Utilizador descarregar pdf (Página 22)

VES-1000 Series Ethernet Switch

1-2 Getting to Know Your VES

STP (Spanning Tree Protocol)

STP detects and breaks network loops and provides backup links between switches, bridges or routers. It allows a

device to interact with other STP-compliant devices in your network to ensure that only one path exists between

any two stations on the network.

IGMP Snooping

With IGMP snooping, group multicast traffic is only forwarded to ports that are members of that group. IGMP

Snooping generates no additional network traffic, allowing you to significantly reduce multicast traffic passing

through your switch.

VDSL Modes and Rates

The VES supports the following DSLAM VDSL modes. VDSL mode can be set per port.

• 10Base-S giving upstream rates from 1.56 Mbps to 18.75 Mbps and downstream rates of 4.17 Mbps

Kbps to 16.67 Mbps.

• ANSI Mode giving upstream rates from 1.56 Mbps to 6.25 Mbps and downstream rates of 4.17 Mbps

to 16.67 Mbps.

• ETSI Mode giving upstream rates from 1.56 Mbps to 6.25 Mbps and downstream rates of 4.17 Mbps

to 12.50Mbps.

• SPECIAL MODE giving upstream rates from 0.78 Mbps to 18.75 Mbps and downstream rates of 0.78

Mbps to 16.66 Mbps

IP Protocols

• IP Host (No routing)

• SNMP for management

 SNMP V1 (RFC 1157)

 Ethernet MIBs for Ethernet and VDSL ports (RFC-1213)

 Bridge MIB (RFC-1493)

 Bridge Extension MIBs (RFC 2674)

• Telnet for configuration and monitoring

Management

• Command-line interface

• Telnet

• SNMP

System Monitoring

• System status (link status, rates, statistics counters)

• Telnet, SNMP for configuration and monitoring

• Temperatures, voltage, fan speed reports (VES-1012 only) and alarms.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 226 227

Sem comentários

ZyXEL Communications VES-1012 - Guia do Utilizador Página 22