Zyxel-communications 200 Series Manual do Utilizador descarregar pdf (Página 149)

100

101

Chapter 6 Tutorials

ZyWALL USG 100/200 Series User’s Guide

149

2 Enter the name of the group that is used in Table 31 on page 148. In this example, it is

“Finance”. Then, select User/Leo and click the right arrow to move him to the Member

list. This example only has one member in this group, so click OK. Of course you could

add more members later.

Figure 85 Object > User/Group > Group > Add

3 Repeat this process to set up the remaining user groups.

6.5.3 How to Set Up User Authentication Using the RADIUS Server

This step sets up user authentication using the RADIUS server. First, configure the settings for

the RADIUS server. Then, set up the authentication method, and configure the ZyWALL to

use the authentication method. Finally, force users to log in to the ZyWALL before it routes

traffic for them.

1 Click Object > AAA Server > RADIUS > Default. Configure the RADIUS server, and

click Apply.

Figure 86 Object > AAA Server > RADIUS > Default

2 Click Object > Auth. method. Click the Add icon.

3 Give the new authentication method object a descriptive name, and click the Add icon.

Select group radius because the ZyWALL should use the specified RADIUS server for

authentication. Click OK.

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 901 902

Comentários a estes Manuais

Sem comentários

Zyxel-communications 200 Series Manual do Utilizador Página 149

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Zyxel-communications 200 Series