Zyxel-communications 2864 Manual do Utilizador Página 162
- Página / 267
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
15–8
Class 2 Flow Control
Flow control is necessary to match the DTE-DCE data rate to the line signaling
rate while transmitting or receiving Group 3 (T.4) data. In Class 2 fax mode, both
hardware (RTS/CTS) and software (XON/XOFF) flow control are enabled.
CLASS 2.0 "AT+F" COMMAND SET.
Commands
n=70 Receives the error on phase B hang up code.
n=90 Receives the error on phase C hang up code.
n=100 Receives the error on phase D hang up code.
+FNSC:"
HEX
string
" Reports the non-standard facilities command
frame.
+FNSF:"HEX string" Reports the non-standard facilities frame re-
sponse.
+FNSS:"
HEX
string
" Reports the non-standard setup frame re-
sponse.
+FPOLL Remote polling indication.
+FPTS:n Receive page transfer status response; refer to
+FPTS=n command.
+FTSI:"string" Report remote ID response TSI.
+FVOICE Transition to Voice response.
Command Syntax
Description
+<command>=<value> Executes a command or sets a parameter.
+<command>=? Reads permissible settings.
+<command>? Reads the current setting.
Command
Value Description
+FAA=n Auto-answer mode parameter:
n=0 The DCE answers as set by +FCLASS.
n=1 The DCE answers and auto-determines the call
type.
+FBO=n Phase C data bit order:
n=0 Selects direct bit order.
n=1 Selects reversed bit order in receiving mode for
phase C data.
+FBS? Buffer size parameter; read only.
Response
Value Function and Description
- 2864 Series Modem 1
- User’s Manual 1
- PUBLISHED BY: 3
- 2F., 58 Park Avenue II 3
- Science-Based Industrial Park 3
- Hsinchu, Taiwan 30077 R.O.C 3
- FCC Part 15 Information 5
- TABLE OF CONTENTS 9
- MODEM INSTALLATION 3-1 10
- MODEM OPERATION 11
- SETTINGS AND COMMANDS 12
- SPECIAL FUNCTIONS 12
- LEASED-LINE OPERATION 12-1 13
- SPECIAL FUNCTIONS 13-1 13
- CELLULAR MODE OPERATION 14-1 13
- FAX OPERATION 15-1 13
- DIAGNOSTICS 18-1 14
- HINTS AND TIPS 15
- APPENDICES 16
- Chapter 1 17
- How To Use This Manual 18
- Compatibility 19
- • Phase jitter 21
- Additional specific features 22
- Before You Start 23
- What You Need To Have 24
- Communication Software 24
- Connecting To Your Phone 25
- Dial-Up Or Leased Line 25
- Chapter 2 27
- RS-232C or EIA-232D/E 28
- Serial Port 28
- Serial RS-232C Cable 28
- Modem Standards and Speeds 29
- Type of Telephone Line 29
- Intelligent Modem 30
- AT Command Set 31
- Error Correction 32
- Protocols 32
- V.42bis and V.42 33
- Xmodem, Ymodem, and Zmodem 33
- Fax and Facsimile 33
- Fax Card 33
- Modem as a Fax 34
- Caller ID 34
- Digitized Voice 35
- Cellular Modem 35
- Chapter 3 37
- Elite 2864 Rear Panel 40
- Connecting the Elite 2864 41
- Elite 2864I and Elite 2864IU 43
- Supreme 2864L 43
- Supreme 2864L Front Panel 44
- Supreme 2864L Rear Panel 44
- Supreme 2864I and 2864IU 45
- Omni 288P and Omni 288S 46
- Omni 288P Rear Panel 47
- Omni 288S Rear Panel 48
- Connecting the Omni 288P 48
- Connecting the Omni 288S 49
- Chapter 4 51
- PC Parallel Port Operation 52
- Parallel Port under Windows 52
- Parallel Port under DOS 52
- Parallel Port Speed Limit 52
- Non-volatile Memory 53
- Firmware Update/Upgrade 54
- DRAM Upgrade 55
- Resetting The Modem 55
- Chapter 5 57
- Panel Operation 58
- Double Arrows on The Screen 59
- Dial Memory 60
- Storing a Number 60
- <ENTER> 61
- 1234567_ 61
- Dialing a number 61
- Repeat Last Dial 62
- Auto Answer 62
- Dialing Messages 63
- -0.0 Hz 64
- DISCONNECTING 65
- DISCONNECT ? 65
- YES NO 65
- IDLE SCREEN (1) 65
- Chapter 6 67
- Menu Tree Elements 68
- TERMINAL OPTIONS 69
- MODEM OPTIONS 72
- ERROR CONTROL 77
- AUDIO OPTIONS 78
- Chapter 7 79
- Resetting from Profile 84
- Saving to Profile 85
- Profile Protection 85
- Resetting Profiles 86
- Chapter 8 87
- S-Register Descriptions 89
- ZyXEL-specific Registers 91
- Chapter 9 111
- Extended AT& Command Set 116
- Extended AT* Command Set 120
- Chapter 10 123
- Data Compression 124
- Run-length Encoding 125
- Adaptive Frequency Encoding 125
- String Coding 125
- Bidirectional Compression 126
- Negotiation Fail Fall-Back 126
- DTE to DCE Connection 126
- Averaging Throughput 126
- Flow Control 127
- Chapter 11 129
- Dial from Synchronous Mode 130
- Chapter 12 135
- Power Level 136
- Handshake Mode 136
- Manual Connection 136
- Leased-Line Dial Backup 137
- Chapter 13 139
- Remote Configuration 140
- Caller Number Delivery(CND) 142
- Distinctive Ring 143
- Extended Distinctive Ring 144
- Setting Up The EDR 145
- V.25bis Command Set 147
- Chapter 14 149
- Cellular Mode Usage 151
- Cellular Modem Installation 152
- Chapter 15 155
- Fax Command Sets 156
- Class 2 Command Set 157
- Extended Fax AT Commands 167
- Messages 172
- Chapter 16 177
- Voice Command State 179
- Voice Data State 180
- Voice Data Receival State 180
- Event Detection and Reporting 181
- Voice AT Commands 184
- Chapter 17 205
- NMS Capable Models 206
- Chapter 18 207
- V34 28800 ALBST DL 209
- Local Modem 210
- Remote Modem 210
- A C A 211
- Link Status Report (ATI2) 213
- Firmware Update 216
- Chapter 19 217
- Chapter 20 219
- Chapter 21 221
- Parallel Cable 222
- Hardware Hints 222
- Chapter 22 225
- Software Tips 226
- Chapter 23 227
- Chapter 24 231
- Chapter 25 235
- Hardware Tips 236
- GLOSSARY 237
- Glossary-2 238
- Glossary-3 239
- Glossary-4 240
- Glossary-5 241
- Glossary-6 242
- Glossary-7 243
- Glossary-8 244
- Appendix A 245
- Appendix B 247
- Appendix C 249
- Appendix D 251
- Appendix E 253
- Selection of ITU-T standards 254
- (V.1 -V.110) 255
- Index-10 266
Manuais e produtos relacionados com Hardware Zyxel-communications 2864
(82 páginas)
Hardware Zyxel-communications 802.11g Wireless Firewall Router P-320W Manual do Utilizador
(215 páginas)
(215 páginas)
Hardware Zyxel-communications Internet Security Appliance ZyWALL5UTM 4.0 Manual do Utilizador
(803 páginas)
(803 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.112 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais