Zyxel-communications 56K Plus Series Manual do Utilizador Página 35
- Página / 66
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Omni 56K Plus Series User’s Guide
Command Sets 4-7
Table 4-4 Extended AT* Command Sets
COMMAND OPTIONS FUNCTION & DESCRIPTION REF.
*C3 8-bit character length
*Dn n=0-3 Set default dial pointer at telephone directory location 'n.' S29
*D0 * (See also S35.4 and S38.0)
*En Modem error control negotiation. S21.0
*E0 * if error control negotiation fails, keep the non-error control
connection.
*E1 If error control negotiation fails, disconnect the call (hang-up).
*Gn *G0 Disables security function. (Default)
*G1 Enables type 1 security, with password check.
*G2 Enables type 1 security, with password check and call back.
*G3 Enables type 2 security, with password check.
*G4 Enables type 2 security, with password check and call back.
*G5 Enables type 2 security, with password check and call back;
remote site enters the call-back number.
*G9 Reset the supervisor password to "ZyXEL".
Note:
The command *Gn requests supervisor password checking.
In security type 1, the remote site must be a ZyXEL modem.
In security type 2, the remote site can be any other type of modem.
The modem can store 4 (0-3) telephone numbers. If call back security is disabled, the
modem will search the password table to check the remote modem's password. If they
match, the modem will keep the connection, otherwise the modem will hand up. If call back
security is enabled, the modem will complete the password checking. If there is no match,
the modem will disconnect the line, otherwise the modem will disconnect the line, find the
corresponding phone number and call back immediately. The remote modem should be set
to auto-answer the call and response.
*HS Modifies supervisor password.
Note: The default supervisor password is ZyXEL.
*Hn N=0-3 Modifies the user password table at location 'n.'
Command set selection S17.6-7
*I0 * AT command set
*In
*I2 Dumb mode
*Pn n=0-15
*P9 *
Set transmission power level; ranges from -8 dBm to -15
dBm. (Default: -11 dBm)
S17.1-4
*Qn Action taken when line quality changes. S27.6-7
*Q0 No action to poor signal quality.
*Q1 Retrain action taken if signal quality is poor. (See also S41.2)
*Q2 * Adaptive rate, automatic fall-back or forward.
- Omni 56K Plus Series 1
- Copyright 2
- Interference Statement 3
- ZyXEL Limited Warranty 4
- Customer Support 5
- Table of Contents 6
- List of Tables 7
- Preface 8
- Chapter 1 11
- Introduction 11
- Chapter 2 13
- Specifications and Function 13
- Description 13
- 2.3 Protocol Support 14
- 2.4 Capability 15
- 2.5 Data Function 16
- 2.5.2 Flow Control 17
- 2.5.5 Error Control 17
- 2.5.6 Data Compression 18
- 2.5.7 Repeat Dial 18
- 2.5.8 Cyclic Dial 18
- 2.5.10 Distinctive Ring 20
- 2.5.11 Security Function 20
- 2.6 Fax function 22
- 2.7 Voice Function 22
- Chapter 3 25
- Result Codes 25
- Table 3-1 Result Codes 26
- Chapter 4 29
- Command Sets 29
- 4.2 Fax command sets 36
- Table 4-8 Command Syntax 37
- "don't care" 40
- Class 2 Flow Control 41
- 4.3 Voice AT Commands 44
- Table 4-12 Voice AT Commands 45
- 4.6 S-Register Descriptions 47
- Chapter 5 55
- Firmware Upgrade 55
- Then click Send 63
Manuais e produtos relacionados com Hardware Zyxel-communications 56K Plus Series
Hardware Zyxel-communications 802.11g Wireless Firewall Router P-320W Manual do Utilizador
(215 páginas)
(215 páginas)
Hardware Zyxel-communications Internet Security Appliance ZyWALL5UTM 4.0 Manual do Utilizador
(803 páginas)
(803 páginas)
Hardware Zyxel-communications 802.11g Wireless USB Adapter ZyXEL G-200 Manual do Utilizador
(11 páginas)
(11 páginas)
(114 páginas)Acer NX.MANAL.009 manuales
Manuales del propietario y guías del usuario para Cuadernos Acer NX.MANAL.009.
Ofrecemos 1 manuales en pdf Acer NX.MANAL.009 para descargar gratis por tipos de documentos: Ficha de datos
Comentários a estes Manuais