Zyxel-communications NWA3160 Manual do Utilizador descarregar pdf (Página 143)

Chapter 10 MBSSID and SSID

ZyXEL NWA-3160 Series User’s Guide

143

QoS Select the Quality of Service priority for this BSS’s traffic.

• In the pre-configured VoIP_SSID profile, the QoS setting is VoIP. This is

not user-configurable. The VoIP setting is available only on the

VoIP_SSID profile, and provides the highest level of QoS.

• If you select WMM from the QoS list, the priority of a data packet depends

on the packet’s IEEE 802.1q or DSCP header. See Section 8.3.1 on page

105 for more information on WMM and WMM priorities. If a packet has no

WMM value assigned to it, it is assigned the default priority.

• If you select ATC from the QoS list, the ZyXEL Device automatically

assigns priority based on packet size. See Section 8.3.2 on page 105 for

more information on ATC.

• If you select ATC+WMM from the QoS list, the ZyXEL Device uses WMM

on the wireless network and ATC on the wired network. See Section 8.3.3

on page 106 for more information on ATC+WMM.

• If you select WMM_VOICE, WMM_VIDEO, WMM_BEST_EFFORT or

WMM_BACKGROUND, the ZyXEL Device applies that QoS setting to all

of that SSID’s traffic.

• If you select NONE, the ZyXEL Device applies no priority to traffic on this

SSID.

Note: When you configure an SSID profile’s QoS settings,

the ZyXEL Device applies the same QoS setting to all

of the profile’s traffic.

Layer-2 Isolation Select a layer 2 isolation profile from the drop-down list box. If you do not

want to use layer 2 isolation on this profile, select Disable. See Section 11.1

on page 145 for more information.

Intra-BSS Traffic

blocking

Select Enable from the drop-down list box to prevent wireless clients in this

profile’s BSS from communicating with one another.

MAC Filtering

Select a MAC filter profile from the drop-down list box. If you do not want to

use MAC filtering on this profile, select Disable. See Section 11.4 on page

150 for more information.

Apply Click Apply to save your changes.

Reset Click Reset to begin configuring this screen afresh.

Table 50 Configuring SSID

LABEL DESCRIPTION

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 313 314

Sem comentários

Zyxel-communications NWA3160 Manual do Utilizador Página 143