Zyxel-communications PLA-407 Manual do Utilizador descarregar pdf (Página 69)

Chapter 7 Powerline Network Setup Tutorial

PLA-407 User’s Guide

5 The settings for the adapter will now grey out and the adapter will disappear from

the table after a few minutes.

Figure 48 An Adapter on Your New Network

6 Go back to step 3 in this section to set the same, new Network Name for all

remote adapters you want to add to your new network.

7 Check you have added the adapters correctly by changing the network name for

the local adapter. All adapters with the new Network Name now appear in the

list of adapters on your network. These adapters are now part of your new

network.

Figure 49 Adapters on a New Powerline Network

• If you want to access any of your new Powerline networks using the PLA-4xx

Series Configuration Utility, change the Network Name on your local

adapter to the network name for the network you want to access. The adapters

on that network will then display in the adapter table, allowing you to select and

configure each one.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 93 94

Sem comentários

Zyxel-communications PLA-407 Manual do Utilizador Página 69