Zyxel-communications Internet Security Gateway 10~100 Series Manual do Utilizador descarregar pdf (Página 64)

ZyWALL 10~100 Series Internet Security Gateway

10-6 Firewall Commands

Chart 10-1 Firewall Commands

FUNCTION COMMAND DESCRIPTION

Config edit firewall set <set

#> rule <rule #> alert <yes |

no>

This command sets whether or not the

ZyWALL sends an alert e-mail when a DOS

attack or a violation of a particular rule occurs.

config edit firewall set <set

#> rule <rule #> srcaddr-single

This command sets the rule to have the

ZyWALL check for traffic with this individual

source address.

config edit firewall set <set

#> rule <rule #> srcaddr-subnet

This command sets a rule to have the

ZyWALL check for traffic from a particular

subnet (defined by IP address and subnet

mask).

config edit firewall set <set

#> rule <rule #> srcaddr-range

<start ip address> <end ip

address>

This command sets a rule to have the

ZyWALL check for traffic from this range of

addresses.

config edit firewall set <set

#> rule <rule #> destaddr-

single <ip address>

This command sets the rule to have the

ZyWALL check for traffic with this individual

destination address.

config edit firewall set <set

#> rule <rule #> destaddr-

subnet <ip address> <subnet

mask>

This command sets a rule to have the

ZyWALL check for traffic with a particular

subnet destination (defined by IP address and

subnet mask).

config edit firewall set <set

#> rule <rule #> destaddr-range

<start ip address> <end ip

address>

This command sets a rule to have the

ZyWALL check for traffic going to this range of

addresses.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 95 96

Comentários a estes Manuais

Sem comentários

Zyxel-communications Internet Security Gateway 10~100 Series Manual do Utilizador Página 64

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Zyxel-communications Internet Security Gateway 10~100 Series