Zyxel-communications NBG334SH Manual do Utilizador descarregar pdf (Página 151)

Chapter 15 Remote Management Screens

ZyXEL NBG-334SH User’s Guide

151

The following table describes the labels in this screen.

15.3 Telnet

You can configure your ZyXEL Device for remote Telnet access as shown next. The

administrator uses Telnet from a computer on a remote network to access the ZyXEL Device.

Figure 84 Telnet Configuration on a TCP/IP Network

15.4 Telnet Screen

To change your ZyXEL Device’s Telnet settings, click Management > Remote MGMT >

Telnet. The following screen displays.

Table 62 WWW Remote Management

LABEL DESCRIPTION

Server Port You may change the server port number for a service if needed, however you must

use the same port number in order to use that service for remote management.

Server Access Select the interface(s) through which a computer may access the ZyXEL Device

using this service.

Secured Client IP

Address

A secured client is a “trusted” computer that is allowed to communicate with the

ZyXEL Device using this service.

Select All to allow any computer to access the ZyXEL Device using this service.

Choose Selected to just allow the computer with the IP address that you specify to

access the ZyXEL Device using this service.

Apply Click Apply to save your customized settings and exit this screen.

Reset Click Reset to begin configuring this screen afresh.

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 289 290

Sem comentários

Zyxel-communications NBG334SH Manual do Utilizador Página 151