Zyxel-communications Omni 56K II Manual do Utilizador descarregar pdf (Página 50)

Omni 56K II and Omni 56K Plus II User’s Guide

5-4 Command Sets

COMMAND OPTIONS FUNCTION & DESCRIPTION REF.

V1 * Displays the result code in verbose form.

Xn n=0-7

5 *

Result code options, see Table 4-1. S23.3-5

n=0-2 Resets the modem and set power-on profile. S15.5-7

Zn Resets the modem and load user profile n (0-1).

Z2 Resets the modem and load factory settings.

+++ This is the escape sequence code. When entered,

the modem returns to online command mode.

5.1.2 Extended AT& Command Sets

Table 5-3 Extended AT& Command Sets

COMMAND OPTIONS FUNCTION & DESCRIPTION REF.

Data rate, terminal-to-modem. (DTE/DCE) S28.6

&B0 The DTE rate follows the connection rate. (See also

S44.6)

&Bn

&B1 * The DTE/DCE rates are fixed at the DTE setting

(See also S18, S20, and S44.6)

Carrier Detect (CD) options S21.4

&C0 CD always ON (See also S42.7)

&Cn

&C1 * CD tracks the presence of carrier (See also S38.3,

S42.7)

Data Terminal Ready (DTR) options. (See also S25) S21.6-7

&D0 Ignore DTR signal, assume DTR is always ON.

&D1 108.1, DTR OFF-ON transition causes dialing of the

default number. (See also 'AT*Dn' and S48.4)

&D2 * 108.2, Data Terminal Ready, DTR OFF causes the

modem to hang up.

&Dn

&D3 Same as &D2 but DTR OFF causes the modem to

hang up and reset from profile 0.

&F Load factory settings to RAM as active configuration.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 87 88

Sem comentários

Zyxel-communications Omni 56K II Manual do Utilizador Página 50