Zyxel-communications P-2602HW(L) Series Manual do Utilizador descarregar pdf (Página 201)

P-2602H(W)(L)-DxA Series User’s Guide

Chapter 14 Firewall Configuration 201

The following table describes the labels in this screen.

Table 72 Firewall: Edit Rule

LABEL DESCRIPTION

Active Select this option to enable this firewall rule.

Action for Matched

Packet

Use the drop-down list box to select whether to discard (Drop), deny and send

an ICMP destination-unreachable message to the sender of (Reject) or allow the

passage of (Permit) packets that match this rule.

Source/Destination

Address

Address Type Do you want your rule to apply to packets with a particular (single) IP, a range of

IP addresses (e.g., 192.168.1.10 to 192.169.1.50), a subnet or any IP address?

Select an option from the drop-down list box that includes: Single Address,

Range Address, Subnet Address and Any

Address.

Start IP Address Enter the single IP address or the starting IP address in a range here.

End IP Address Enter the ending IP address in a range here.

Subnet Mask Enter the subnet mask here, if applicable.

Add >> Click Add >> to add a new address to the Source or Destination Address box.

You can add multiple addresses, ranges of addresses, and/or subnets.

Edit << To edit an existing source or destination address, select it from the box and click

Edit <<.

Delete Highlight an existing source or destination address from the Source or

Destination Address box above and click Delete to remove it.

Services

Available/ Selected

Services

Please see Appendix F on page 371 for more information on services available.

Highlight a service from the Available Services box on the left, then click Add

>> to add it to the Selected Services box on the right. To remove a service,

highlight it in the Selected Services box on the right, then click Remove.

Edit Customized

Service

Click the Edit Customized Services link to bring up the screen that you use to

configure a new custom service that is not in the predefined list of services.

Schedule

Day to Apply Select everyday or the day(s) of the week to apply the rule.

Time of Day to

Apply (24-Hour

Format)

Select All Day or enter the start and end times in the hour-minute format to apply

the rule.

Log

Log Packet Detail

Information

This field determines if a log for packets that match the rule is created or not. Go

to the Log Settings page and select the Access Control logs category to have

the ZyXEL Device record these logs.

Alert

Send Alert Message

to Administrator

When Matched

Select the check box to have the ZyXEL Device generate an alert when the rule

is matched.

Back Click Back to return to the previous screen.

Apply Click Apply to save your customized settings and exit this screen.

Cancel Click Cancel to exit this screen without saving.

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 426 427

Comentários a estes Manuais

Sem comentários

Zyxel-communications P-2602HW(L) Series Manual do Utilizador Página 201

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Zyxel-communications P-2602HW(L) Series