
P-2602R/RL-DxA Series User’s Guide
Chapter 6 Status Screens 75
System
Uptime
This field displays how long the ZyXEL Device has been running since it last
started up. The ZyXEL Device starts up when you plug it in, when you restart it
(Maintenance > Tools > Restart), or when you reset it (see Section 2.1.2 on page
47).
Current Date/
Time
This field displays the current date and time in the ZyXEL Device. You can change
this in Maintenance > System > Time Setting.
System Mode This displays whether the ZyXEL Device is functioning as a router or a bridge.
CPU Usage This field displays what percentage of the ZyXEL Device’s processing ability is
currently used. When this percentage is close to 100%, the ZyXEL Device is
running at full load, and the throughput is not going to improve anymore. If you
want some applications to have more throughput, you should turn off other
applications (for example, using bandwidth management; see Chapter 16 on page
187).
Memory
Usage
This field displays what percentage of the ZyXEL Device’s memory is currently
used. Usually, this percentage should not increase much. If memory usage does
get close to 100%, the ZyXEL Device is probably becoming unstable, and you
should restart the device. See Section 22.6 on page 241, or turn off the device
(unplug the power) for a few seconds.
Interface Status
Interface This column displays each interface the ZyXEL Device has.
Status For the DSL interface, this field displays Down (line is down), Up (line is up or
connected) if you're using Ethernet encapsulation and Down (line is down), Up
(line is up or connected), Idle (line (ppp) idle), Dial (starting to trigger a call) and
Drop (dropping a call) if you're using PPPoE encapsulation.
This field indicates whether or not the ZyXEL Device is using the interface.
For the LAN interface, this field displays Up when the ZyXEL Device is using the
interface and Down when the ZyXEL Device is not using the interface.
Rate For the LAN interface, this displays the port speed and duplex setting.
For the DSL interface, it displays the downstream and upstream transmission rate.
Summary
Client List Click this link to view current DHCP client information. See Section 8.5 on page
104.
AnyIP Table Click this link to view a list of IP addresses and MAC addresses of computers,
which are not in the same subnet as the ZyXEL Device. See Section 6.2 on page
76.
Bandwidth
Status
Click this link to view the ZyXEL Device’s bandwidth usage and allotments. See
Section 16.9 on page 196.
Packet
Statistics
Click this link to view port status and packet specific statistics. See Section 6.3 on
page 77.
VoIP Statistics Click this link to view statistics about your VoIP usage. See Section 6.4 on page
78.
VoIP Status
Account This column displays each SIP account in the ZyXEL Device.
Table 16 Status Screen
LABEL DESCRIPTION
Comentários a estes Manuais