Zyxel-communications P-870MH-C1 Manual do Utilizador descarregar pdf (Página 28)

Chapter 3 Configuration Using the SMT

P-870MH-C1 User’s Guide

Fill in the required fields. Refer to the table shown next for more information about these

fields.

3.3 LAN Setup

This section describes how to configure the Ethernet using Menu 3.2 — TCP/IP and DHCP

Ethernet Setup.

To edit Menu 3.2, enter 3 from the main menu to display Menu 3 — LAN Setup. When Menu

3 appears, press 2 and press [ENTER] to display Menu 3.2 — TCP/IP and DHCP Ethernet

Setup as shown next

Figure 7 Menu 3.2 TCP/IP and DHCP Ethernet Setup

The following table describes the fields in this screen.

Table 5 Menu 1 General Setup

FIELD DESCRIPTION

System Name Choose a descriptive name for identification purposes. This name can be up to

30 alphanumeric characters long. Spaces are not allowed, but dashes “-” and

underscores "_" are accepted.

Domain Name Enter the domain name (if you know it) here. If you leave this field blank, the ISP

may assign a domain name via DHCP. You can go to Menu 24.8 and type "sys

domainname" to see the current domain name used by your gateway.

If you want to clear this field just press the [SPACE BAR]. The domain name

entered by you is given priority over the ISP assigned domain name.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm

or ESC to Cancel:” to save your configuration, or press [ESC] at any time to cancel.

Menu 3.2 - TCP/IP and DHCP Ethernet Setup

DHCP= None TCP/IP Setup:

Client IP Pool:

Starting Address= N/A IP Address= 192.168.1.2

Size of Client IP Pool= N/A IP Subnet Mask= 255.255.255.0

Multicast= None

Edit IP Alias= No

Press ENTER to Confirm or ESC to Cancel:

Table 6 Menu 3.2 TCP/IP and DHCP Ethernet Setup

FIELD DESCRIPTION

DHCP If set to Server, your P-870MH-C1 can assign IP addresses, a default

gateway and DNS servers to a compuer(s) set to use a dynamic IP address.

(DHCP client).

If set to None, the DHCP server will be disabled.

When DHCP server is used, the following items need to be set:

Client IP Pool

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 73 74

Sem comentários

Zyxel-communications P-870MH-C1 Manual do Utilizador Página 28