Zyxel-communications ZYWALL 100 Manual do Utilizador descarregar pdf

ZyWALL 100 Read Me First

Rear Panel Connections

PORT CONNECTION

CONSOLE Connect to your computer’s com port using a console cable.

WAN 10/100M Connect to a cable/xDSL device using an Ethernet cable.

DIAL BACKUP Connect to an analog or ISDN device using a console (RS-232)

cable.

POWER Connect the power cord to the ZyWALL and plug it into an

appropriate power outlet.

TO A COMPUTER TO A HUB

DMZ Crossover Ethernet cable Straight-through Ethernet cable

LAN 10/100M - UPLINK button “on” (pushed in)

Straight-through Ethernet cable Crossover Ethernet cable

LAN 10/100M - UPLINK button “off” (out)

Crossover Ethernet cable Straight-through Ethernet cable

WIRELESS LAN Use a ZyXEL Wireless PC Card to connect to a wireless LAN.

1 2 3 4 5

ZyWALL 100 Read Me First Rear Panel Connections Rear Panel Connections PORT CONNECTION CONSOLE Connect to your computer’s com port using a console

Before You Start Before You Start ZYWALL FACTORY DEFAULTS IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 Password: 1234 DHCP IP Pool: 192.168.1.

1. Click Start and then Run. In the Run window, type "winipcfg" and then click OK to open the IP Configuration window. 2. Select your net

• Telnet • Console port using terminal emulation software Procedure For Web Configurator Configuration 1. Launch your web browser and enter “192

Client IP field, your computer’s IP address must match it. For access from the LAN, check your computer’s TCP/IP configuration. The IP address and t

Sem comentários

Zyxel-communications ZYWALL 100 Manual do Utilizador