ZyXEL Communications U-1496 series Manual do Utilizador descarregar pdf (Página 71)

RING

04-28 12:30 7135551414

RING

For a multiple message format, if the caller's number and name are available, the ring message

will be

RING

TIME: MM-DD hh:mm

CALLER NUMBER: <Caller_ID>

CALLER NAME: <Caller_Name>

RING

Following is an example:

RING

TIME: 04-28 12:30

CALLER NUMBER: 7135551414

CALLER NAME: Michael Smith

RING

If the caller number and name are not available, the ring message will be

RING

TIME: 04-28 12:30

REASON FOR NO NUMBER: OUT_OF_AREA

REASON FOR NO NAME: PRIVACY

RING

The AT*T command will have the modem send the last CND message.

Setting S48.0=1 will cause the modem to report CND information in its raw data format. The

DTE software is responsible in explaining the data. Please refer to Bellcore Technical Advisory

AT-NWT-000030 document for data format.

DISTINCTIVE RING

This is a phone service that may be offered by your phone company. Check your phone

company for availability. With this service, you can have several phone numbers assigned to the

same phone line. The phone company will send a different type of ring signal for each phone

number being called. The subscriber can distinguish which number is called by distinguishing

which type of ring is received.

A simple use of this feature is that you can have three numbers on the same line and you can list

the three numbers for voice, data, and fax, respectively. You can then have your fax machine

answer only the ring corresponding to the fax number and have your modem answer only the

ring corresponding to the data number. The voice call will not be answered by either fax machine

or data modem and it will only be answered when someone picks up the phone. Or you can have

the answering machine answer only the voice ring. A more complicated use is that you can have

one number for more uses, e.g., one number for both data and fax.

Ring signal is a repeated on and off of ring. Different type of ring usually corresponds to a

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 107 108

Sem comentários

ZyXEL Communications U-1496 series Manual do Utilizador Página 71