ZyXEL Communications P-2302HWUDL-P1 Guia do Utilizador Página 73

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 72
Chapter 4 Status Screens
P-2302HWUDL-P1 Series User’s Guide
73
System Resource
CPU Usage This field displays what percentage of the ZyXEL Device’s processing ability is
currently used. When this percentage is close to 100%, the ZyXEL Device is
running at full load, and the throughput is not going to improve anymore. If you
want some applications to have more throughput, you should turn off other
applications (for example, using bandwidth management; see Chapter 17 on page
205.
Memory
Usage
This field displays what percentage of the ZyXEL Device’s memory is currently
used. Usually, this percentage should not increase much. If memory usage does
get close to 100%, the ZyXEL Device is probably becoming unstable, and you
should restart the device. See Section 24.2.5 on page 285, or turn off the device
(unplug the power) for a few seconds.
IVR Usage This field displays what percentage of the ZyXEL Device’s Interactive Voice
Response (IVR) memory is currently used. This memory is used to store
recordings of custom tones that the ZyXEL Device plays when people call you.
See Section 9.2 on page 138 for more information.
Interface Status
Interface This column displays each interface the ZyXEL Device has.
Status This field indicates whether or not the ZyXEL Device is using the interface.
Up - The ZyXEL Device is using the interface.
Down - The ZyXEL Device is not using the interface.
Rate If the interface uses Ethernet encapsulation, this column displays the port speed
and the Ethernet duplex setting. Duplex settings are:
Full - The ZyXEL Device is using full-duplex Ethernet.
Half - The ZyXEL Device is using half-duplex Ethernet.
You cannot change the Ethernet duplex setting in the ZyXEL Device.
If this interface uses PPPoE encapsulation, this column displays the port speed
and the status of the call.
Down - The connection is not available.
Dial - The ZyXEL Device is making a call.
Idle - The call is connected.
Drop - The ZyXEL Device is ending the call.
The LAN interface always uses Ethernet encapsulation. You can change the
encapsulation of the WAN interface in Network > WAN > Internet Connection.
For the WLAN interface this field displays the transmission rate of the ZyXEL
Device.
Summary
Any IP Table Click (Details ...) to open the Any IP Table window. See Section 4.2 on page 74.
DHCP Table Click (Details ...) to open the DHCP Table window. See Section 4.3 on page 75.
VoIP Statistics Click (Details ...) to open the VoIP Statistics window. See Section 4.4 on page
75.
BW MGMT
Monitor
Click (Details ...) to open the BW MGMT Monitor window. See Section 4.5 on
page 77.
Packet Statistics Click (Details ...) to open the Packet Statistics window. See Section 4.6 on page
79.
VoIP Status
Account This column displays each SIP account in the ZyXEL Device.
Table 27 Status Screen
LABEL DESCRIPTION
Vista de página 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 367 368

Comentários a estes Manuais

Sem comentários