ZyXEL Communications STB-1001S Guia do Utilizador descarregar pdf (Página 53)

Chapter 5 Product Specifications

STB-1001S User’s Guide

Wall-mounting Instructions

" It is recommended that you do NOT wall-mount the STB. Wall-mounting kit is

not included.

Complete the following steps to hang your STB on a wall.

" See Table 9 on page 51 for the size of screws to use and how far apart to place

them.

1 Select a position free of obstructions on a sturdy wall.

2 Drill two holes for the screws.

1 Be careful to avoid damaging pipes or cables located inside the wall when

drilling holes for the screws.

3 Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm

between the heads of the screws and the wall.

4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of

the STB with the connection cables.

5 Align the holes on the back of the STB with the screws on the wall. Hang the STB on the

screws.

Power Consumption

Safety Standards UL (UL 1950), CSA (CSA 22.2)

CE mark, EN60950 (2001)

T-Mark

C-tick, QAS

Table 12 Power Adaptor Specifications

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 136 137

Sem comentários

ZyXEL Communications STB-1001S Guia do Utilizador Página 53