ZyXEL Communications B-5000 - Guia do Utilizador descarregar pdf (Página 156)

ZyAIR B-5000 User’s Guide

21-4 Configuration Scenarios

Figure 21-2 Wireless Access Router with PPP over Ethernet (PPPoE)

21.1.3 Configure the ZyAIR as a Wireless Access Router with Dynamic IP

Address (DHCP Client)

Step 1. Select ACCESS POINT as the operating mode, click NEXT.

Step 2. Click ADVANCED CONFIG.

Step 3. Select BRIDGING.

Step 4. Click Disable for Bridge Function.

Step 5. Click FINISH.

Step 6. Click BASIC CONFIG.

Step 7. Select Interface Parameters.

Step 8. Click a radio button and select MODIFY to choose the interface that you want to change.

Step 9. In interface 1, ensure that the wireless interface Status is Active and enter the IP address and

wireless interface Net Mask that is suitable for your wireless network. Turn NAT (PAT) ‘off’.

Step 10. In interface 2, Ensure that the ethernet interface Status is set to Active. The other parameters

will be obtained automatically by DHCP from your network environment. Turn NAT (PAT)

‘on’.

Step 11. Click the OK button to return to the Interface Parameters window.

1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 286 287

Sem comentários

ZyXEL Communications B-5000 - Guia do Utilizador Página 156