ZyXEL Communications ES-315-F - V3.70 Guia do Utilizador Página 305

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 363
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 304
GS-4012F/4024 User’s Guide
304 Chapter 44 Configuration Mode Commands
where
An example is shown next.
Enable the IP route with the IP address of 192.168.11.1 and subnet mask of
255.255.255.0. This ip route must have already been created and made inactive prior to
re-enable command being applied.
44.4.4 Other Examples of no Commands
In some cases the no command can disable a feature, disable an option of a feature or disable a
feature on a port by port basis.
44.4.4.1 no trunk
Syntax:
no trunk <T1|T2|T3|T4|T5|T6>
no trunk <T1|T2|T3|T4|T5|T6> lacp
no trunk <T1|T2|T3|T4|T5|T6> interface <port-list>
where
An example is shown next.
Disable trunk one (T1).
Disable LAPC on trunk three (T3).
Remove ports one, three, four and five from trunk two (T2).
<ip> <mask> inactive
= Re-enables an ip route with the specified IP address and
subnet mask.
sysname(config)# no ip route 192.168.11.1 255.255.255.0 inactive
<T1|T2|T3|T4|T5|T6>
= Disables the trunk group.
<T1|T2|T3|T4|T5|T6>
lacp
= Disables LACP in the trunk group.
<T1|T2|T3|T4|T5|T6>
interface <port-list>
= Removes ports from the trunk group.
sysname(config)# no trunk T1
sysname(config)# no trunk T3 lacp
sysname(config)# no trunk T2 interface 1,3-5
Vista de página 304
1 2 ... 300 301 302 303 304 305 306 307 308 309 310 ... 362 363

Comentários a estes Manuais

Sem comentários