
Dimension ES-4024 Ethernet Switch
7-6 VLAN
The following table describes the labels in this screen.
Table 7-3 VLAN: VLAN Port Setting
LABEL DESCRIPTION
GVRP GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a way for
switches to register necessary VLAN members on ports across the network.
Select this check box to permit VLAN groups beyond the local switch.
Port Isolation Port Isolation allows each port (1 to 26) to communicate only with the CPU management port
but not communicate with each other. All incoming ports are selected while only the CPU
outgoing port is selected. This option is the most limiting but also the most secure.
Port This field displays the port numbers.
Ingress Check Select this check box to activate ingress filtering.
Clear this check box to disable ingress filtering.
PVID Enter a number between 1 and 4094 as the port VLAN ID.
GVRP Select this check box to allow GVRP on this port.
Acceptable
Frame Type
Specify the type of frames allowed on a port. Choices are All, Tag Only and Untag Only.
Select All from the drop-down list box to accept all untagged or tagged frames on this port. This
is the default setting.
Select Tag Only to accept only tagged frames on this port. All untagged frames will be dropped.
Select Untag Only to accept only untagged frames on this port. All tagged frames will be
dropped.
VLAN Trunking Enable VLAN Trunking on ports connected to other switches or routers (but not ports directly
connected to end users) to allow frames belonging to unknown VLAN groups to pass through
the switch.
Apply Click Apply to save the changes
Cancel Click Cancel to start configuring the screen again.
7.1.6 Configuring a VLAN
To configure a new VLAN, click Static VLAN in the VLAN Status screen to display the screen as shown next.
Comentários a estes Manuais