ZyXEL Communications G-200 Guia do Utilizador descarregar pdf (Página 4)

SP-200E User’s Start Guide

2.3 Front Panel Push-Buttons

Push the power switch to ON. The buttons on the front panel light up when the statement printer is receiving

power. The following table describes push-button’s LED status and functions.

Note: If the printer prints continuously for two minutes, you must stop printing for at least eight minutes.

Table 2 Front Panel Push-Buttons

3 Loading Paper Rolls

Use the following steps to prepare the statement printer for use with a gateway.

LED Status Printer mode Function

All Button

LEDs Off

Off All of the printer’s functions are stopped.

Hold button A down while you turn on the power to have the printer print a self-

test.

All Button

LEDs On

(Green)

On (Ready) Push a button to create a customer account with the configured account service

period. Refer to the gateway User’s Guide for information on how to configure the

gateway for use with the SP-200E.

Button A

Blinking

(Green)

Out of paper/

Cover open

No function.

1 Push the cover release button. 2 Open the cover.

1 2 3 4 5 6 7 8 9 10 11

Sem comentários

ZyXEL Communications G-200 Guia do Utilizador Página 4