AsComm manual Program Parameterization
©ASKOM, Gliwice October 2007 11
only the initial part of modem name.
Number Telephone number. The parameter is
important only when the parameter
Switched_Line has a value of „Yes”.
N/A
Parity Kind of parity check N
Com Number of serial port. The port name may
be preceded by a string COM i.e. Com = 2
and Com = Com2 are both correct and
signify the same port.
N/A
Retries Number of unsuccessful transmissions 3
Priority Client priority 0
Timeout Timeout of waiting for answer N/A
Time_align Determines the time synchronization for
connection established periodically.
Allowable values: Yes, No or a value,
which determines a time offset in relation
to the time, which is a multiple of interval.
For instance if the interval is equal to 1h
and the parameter Synchronization has a
value of 15m then the connections will be
established at: 12:15:00, 01:15:00 etc..
N/A
One should notice that a client using a connection may determine itself the transmission
parameters such as speed, stop bits, parity, timeout etc. The settings, concerning the
transmission, determined directly by the client have priority over the settings specified by
the above entries.
Resource Parameters
Resource parameters are placed in a section with the same name as the resource name:
Name Description Default
value
Max_Connection_Time If the parameter Max_Connection_Time
is given for the client too then the
smaller one is taken into consideration.
N/A
Min_Inter_Connection_Time Minimal time interval between
connections. If the parameter
Min_Inter_Connection_Time is given
for the client too then the greater one is
taken into consideration. The parameter
may be useful in case of sharing a line
switched by a modem or other devices
(for instance telephone), enabling these
devices to use the switched line.
0
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais