ZyXEL Communications P-2602R-63 Guia do Utilizador descarregar pdf (Página 258)

Prestige 2602R Series User’s Guide

Chapter 33 IP Policy Routing 258

33.5 Applying an IP Policy

This section shows you where to apply the IP policies after you design them.

33.5.1 Ethernet IP Policies

From Menu 3 — Ethernet Setup, type 2 to go to Menu 3.2 — TCP/IP and DHCP Ethernet

Setup.

You can choose up to four IP policy sets (from 12) by typing their numbers separated by

commas, for example, 2, 4, 7, 9.

Gateway addr Defines the outgoing gateway address. The gateway must be on the same

subnet as the Prestige if it is on the LAN, otherwise, the gateway must be the IP

address of a remote node. The default gateway is specified as 0.0.0.0.

Type of Service Set the new TOS value of the outgoing packet. Prioritize incoming network traffic

by choosing No Change, Normal, Min Delay, Max Thruput, Max Reliable or

Min Cost.

Precedence Set the new outgoing packet precedence value. Values are 0 to 7 or No

Change.

Log Press [SPACE BAR] and then [ENTER] to select Yes to make an entry in the

system log when a policy is executed.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm

or ESC to Cancel:

” to save your configuration, or press [ESC] at any time to cancel.

Table 76 Menu 25.1.1 IP Routing Policy (continued)

FIELD DESCRIPTION

1 2 ... 253 254 255 256 257 258 259 260 261 262 263 ... 348 349

Sem comentários

ZyXEL Communications P-2602R-63 Guia do Utilizador Página 258