BASIC OPERATIONS ON THE ROUTER
3-10
Once completed these previous fields, press Apply/Save button to make the router saves the
changes properly.
3.2.2 MONOUSER CONFIGURATIONS
These are not highly recommended settings for this router due to the advanced features
supported by this device cannot be used. In this case, the PC is the device directly connected
to the internet, where the NAT feature in the router is disabled. It is recommended to adopt
some safety applications to avoid undesired threats or intrusions in the PC.
MONOUSER DYNAMIC
In this case, you will need to install a PPPoE client in the PC. If you are using Windows
2000, you can use the client provided in the package or the one supported by the own OS in
Windows XP, Vista and 7. If you are using a different operating system, please refer to the
help information in your OS to see how to install and use a PPPoE client. If you cannot have
this PPPoE client in your operating system, you won’t be able to work under this mode.
In the configuration process of the PPPoE client installed on the PC you will need to
introduce username and password to establish the connection. Additionally it will be required
both PC and router to have IP visibility. To do that, both devices must be configured in the
same IP private network range. As we take factory default settings as starting point, then the
router will have the IP address 192.168.1.1 with network mask 255.255.255.0 and the PC
will receive the IP settings through DHCP. If it were necessary, refer to the CPE User’s
Guide to see how to restore factory default settings in your router.
It is not mandatory, but you can configure the DHCP server settings with the values refered
in the Figure 3-2: Private network address configuration options in multiuser mode
Go to: Advanced Setup -> WAN and select the Remove checkbox, pressing next the bottom
Remove to delete the existing WAN interface, as shown in above figure 3-5.
After that, press on the Add bottom in the same screen, to add a new WAN connection and
you will obtain the following sequence of screens where an example appears configured for
this case. It will be necessary to configure here the right value of the public IP address
received for the broadband line. In the next screenshots you can find the rest of parameters
already configured with the right values. It is recommended not changing them. To move
forward to next screens, press the Next bottom on each page.
(51 páginas)
(121 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais