ZyXEL Communications 2002 Series Guia do Utilizador descarregar pdf (Página 42)

Prestige 650HW ADSL Router User’s Guide

2-14 Hardware Installation and Initial Setup

Table 2-4 General Setup Menu Fields

FIELD DESCRIPTION EXAMPLE

System Name Choose a descriptive name for identification purposes. This name can

be up to 30 alphanumeric characters long. Spaces are not allowed, but

dashes “-” and underscores "_" are accepted.

P650HW

Location (optional) Enter the geographic location (up to 31 characters) of your Prestige. MyHouse

Contact Person's

Name (optional)

Enter the name (up to 30 characters) of the person in charge of this

Prestige.

JohnDoe

Domain Name Enter the domain name (if you know it) here. If you leave this field

blank, the ISP may assign a domain name via DHCP. You can go to

menu 24.8 and type "sys domainname" to see the current domain

name used by your gateway.

If you want to clear this field just press the [SPACE BAR]. The domain

name entered by you is given priority over the ISP assigned domain

name.

zyxel.com.tw

Edit Dynamic DNS

Press the [SPACE BAR] to select Yes or No (default). Select Yes to

configure Menu 1.1 — Configure Dynamic DNS (discussed next).

Route IP

Set this field to Yes to enable or No to disable IP routing. You must

enable IP routing for Internet access.

Yes

Bridge Turn on/off bridging for protocols not supported (for example, SNA) or

not turned on in the previous Route IP field. Select Yes to turn

bridging on; select No to turn bridging off.

2.11.3 Procedure to Configure Dynamic DNS

Step 1. To configure Dynamic DNS, go to Menu 1 — General Setup and select Yes in the Edit

Dynamic DNS field. Press [ENTER] to display Menu 1.1— Configure Dynamic DNS as

shown next.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 209 210

Sem comentários

ZyXEL Communications 2002 Series Guia do Utilizador Página 42