ZyXEL Communications NWD-210N - FOR MAC V1.00 Guia do Utilizador descarregar pdf (Página 112)

Chapter 13 DHCP Server

NBG6616 User’s Guide

112

Figure 72 Network > DHCP Server > General

The following table describes the labels in this screen.

13.3 DHCP Server Advanced Screen

This screen allows you to assign IP addresses on the LAN to specific individual computers based on

their MAC addresses. You can also use this screen to configure the DNS server information that the

NBG6616 sends to the DHCP clients.

To change your NBG6616’s static DHCP settings, click Network > DHCP Server > Advanced. The

following screen displays.

Table 46 Network > DHCP Server > General

LABEL DESCRIPTION

DHCP Server Select Enable to activate DHCP for LAN.

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows

individual clients (computers) to obtain TCP/IP configuration at startup from a server.

Enable the DHCP server unless your ISP instructs you to do otherwise. Select Disable

to stop the NBG6616 acting as a DHCP server. When configured as a server, the

NBG6616 provides TCP/IP configuration for the clients. If not, DHCP service is

disabled and you must have another DHCP server on your LAN, or else the computers

must be manually configured. When set as a server, fill in the following four fields.

IP Pool Starting

Address

This field specifies the first of the contiguous addresses in the IP address pool for LAN.

Pool Size This field specifies the size, or count of the IP address pool for LAN.

Apply Click Apply to save your changes back to the NBG6616.

Cancel Click Cancel to begin configuring this screen afresh.

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 245 246

Sem comentários

ZyXEL Communications NWD-210N - FOR MAC V1.00 Guia do Utilizador Página 112