ZyXEL Communications P-2602HWL-C - Guia do Utilizador descarregar pdf (Página 438)

Chapter 32 Product Specifications

P-2602HWUDL-D User’s Guide

438

Table 177 Voice Features

Call Fallback Call fallback allows you to set the ZyXEL Device to automatically use the PSTN

connection for outgoing calls if the SIP account is not working, or to use the SIP

account for outgoing calls if the PSTN port is unplugged or not working.

Call Park and

Pickup

Call park and pickup lets you put a call on hold (park) and then continue the call

(pickup). You can continue the call on the same phone, or another phone

connected to the ZyXEL Device. The caller must still pay while the call is

parked.

When you park the call, you enter a number of your choice (up to eight digits),

which you must enter again when you pick up the call. If you do not enter the

correct number, you cannot pickup the call. This means that only someone who

knows the number you have chosen can pick up the call.

You can have more than one call on hold at the same time, but you must give

each call a different number.

Call Return With call return, you can place a call to the last number that called you (either

answered or missed). The last incoming call can be through either SIP or

PSTN.

Country Code Phone standards and settings differ from one country to another, so the settings

on your ZyXEL Device must be configured to match those of the country you

are in. The country code feature allows you to do this by selecting the country

from a list rather than changing each setting manually. Configure the country

code feature when you move the ZyXEL Device from one country to another.

Distinctive Ringing With the distinctive ring feature, you can assign different ringing tones to

different incoming calls, based either on the number that calls you or from

where the call originates (SIP, PSTN or internal). Use this feature to let you

know where a call comes from before you answer it.

Do not Disturb

(DnD)

This feature allows you to set your phone not to ring when someone calls you.

You can set each phone independently using its keypad, or configure global

settings for all phones using the command line interpreter.

Auto Dial You can set the ZyXEL Device to automatically dial a specified number

immediately whenever you lift a phone off the hook. Use the Web Configurator

to set the specified number. Use the command line interpreter to have the

ZyXEL Device wait a specified length of time before dialing the number.

Music on hold This feature allows you to put a call on hold and have the other person hear a

piece of audio (music, speech, etc.) you previously recorded.

Phone config The phone config table allows you to customize the phone keypad combinations

you use to access certain features on the ZyXEL Device, such as call waiting,

call return, call forward, etc. The phone config table is configurable in command

interpreter mode.

Internal call When you have phones attached to both of the ZyXEL Device’s phone ports,

you can dial “####” to place a call to the phone(s) connected to the other port.

HTTP pincode If your service provider uses an auto provisioning server, you need to enter a

personal identification number (supplied by your service provider) before you

first use the feature.

Firmware update

enable / disable

If your service provider uses this feature, you hear a recorded message when

you pick up the phone when new firmware is available for your ZyXEL Device.

Enter *99# in your phone’s keypad to have the ZyXEL Device upgrade the

firmware, or enter #99# to not upgrade. If your service provider gave you

different numbers to use, enter them instead. If you enter the code to not

upgrade, you can make a call as normal. You will hear the recording again each

time you pick up the phone, until you upgrade.

Call waiting This feature allows you to hear an alert when you are already using the phone

and another person calls you. You can then either reject the new incoming call,

put your current call on hold and receive the new incoming call, or end the

current call and receive the new incoming call.

1 2 ... 433 434 435 436 437 438 439 440 441 442 443 ... 549 550

Comentários a estes Manuais

Sem comentários

ZyXEL Communications P-2602HWL-C - Guia do Utilizador Página 438

Comentários a estes Manuais

Manuais e produtos relacionados com Routers ZyXEL Communications P-2602HWL-C -