ZyXEL Communications P8701T Guia do Utilizador descarregar pdf (Página 84)

Chapter 4 WAN

Basic Home Station VDSL2 P8701T User’s Guide

Figure 22 WAN Configuration: Service Type

Figure 23 The following table describes the labels in this screen.

Table 19 WAN Configuration: Service Type

LABEL DESCRIPTION

Select WAN

service type

Select the method of encapsulation used by your ISP.

Choices are PPP over Ethernet (PPPoE), IP over Ethernet and Bridging.

Enter Service

Description

Specify a name for this connection or use the automatically generated one.

Rate Limit Enter the maximum transmission rate in Kbps for traffic sent through the WAN connection.

Otherwise, leave this field blank to disable the rate limit.

This field is not available for an ATM connection if QoS is disabled in the DSL ATM Interface

Configuration.

Tag VLAN ID for

egress packets

Select this option to add the VLAN tag (specified below) to the outgoing traffic through this

connection.

This field is available when the layer-2 interface is in VLANMUX mode.

Enter 802.1P

Priority

IEEE 802.1p defines up to 8 separate traffic types by inserting a tag into a MAC-layer

frame that contains bits to define class of service.

Type the IEEE 802.1p priority level (from 0 to 7) to add to traffic through this connection.

The greater the number, the higher the priority level.

This field is available when the layer-2 interface is in VLANMUX mode.

Enter 802.1Q

VLAN ID

Type the VLAN ID number (from 1 to 4094) for traffic through this connection.

This field is available when the PTM interface is in VLANMUX mode.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 239 240

Sem comentários

ZyXEL Communications P8701T Guia do Utilizador Página 84