ZyXEL Communications P870HNU-51B Guia do Utilizador Página 1

BASIC INSTRUCTIONS TO CONFIGURE ZYXEL P870HNU-51B CPE USING THE WEB INTERFACE Version 1.1 15/06/2011

3 BASIC OPERATIONS ON THE ROUTER 3.1 PASSWORD MODIFICATION This is the first operation recommended to be made. Select: Maintenance -> Syste

BASIC OPERATIONS ON THE ROUTER 3.2 CONFIGURING THE ROUTER If you are going to connect only one PC to your router, a monouser configuration would be

BASIC OPERATIONS ON THE ROUTER Figure 3-2: Private network address options configuration in multiuser mode If you want, you can change the router I

BASIC OPERATIONS ON THE ROUTER The WAN configuration options are the features required for the VDSL2 interface. Select: Network -> WAN to display

BASIC OPERATIONS ON THE ROUTER Once completed these previous fields, press Next button in all the coming screens which could appear, without modifyi

BASIC OPERATIONS ON THE ROUTER 3.2.2 MONOUSER CONFIGURATIONS These are not highly recommended settings for this router due to the advanced features

BASIC OPERATIONS ON THE ROUTER Figure 3-6: WAN options configuration in monouser dynamic mode MONOUSER STATIC For the monouser static mode, in case

BASIC OPERATIONS ON THE ROUTER Figure 3-7: Network options configuration in monouser static mode Once completed these previous fields, press Apply

BASIC OPERATIONS ON THE ROUTER Figure 3-8: WAN options configuration in monouser static mode Once completed these previous fields, press Apply/Save

BASIC OPERATIONS ON THE ROUTER Figure 3-9: Port Forwarding-1 By deploying the “Service Name” option you´ll be able to see the most common ports. Fo

BASIC OPERATIONS ON THE ROUTER Figure 3-10: Port Forwarding-2 Fill in the data required in the rule for the service name, the port number, IP addre

BASIC OPERATIONS ON THE ROUTER Movistar recommends, for safety reasons, to enable always some encryption in the wireless network. If the network has

BASIC OPERATIONS ON THE ROUTER Figure 3-12: Security modalities WEP ENCRYPTION In Network -> Wireless LAN -> General option you can defin

BASIC OPERATIONS ON THE ROUTER Figure 3-13: Wireless LAN enabled with WEP encryption Once completed previous fields, press Apply and the router wil

BASIC OPERATIONS ON THE ROUTER Figure 3-44: WPA encryption settings Once introduced previous parameters, press Apply and the router will be configu

BASIC OPERATIONS ON THE ROUTER Version 1.1 Figure 3-55: Firmware upgrade Press the Examinar button, look for the file containing the firmware in y

4 USB INTERFACE This device built-in an USB 2.0 master port which allows end-users to increase the functionality of their access device. By one

PRINTER SERVER It will be possible to access only to the primary partitions of the NTFS or FAT32 type of the disks connected, but not po

PRINTER SERVER 2.- The Add Printer Wizard screen displays. Click Next. 3.- Select A network printer, or a printer attach

Index iii Version 1.1 13BBASIC INSTRUCTIONS TO CONFIGURE ZYXEL P870HNU-51B CPE USING THE WEB INTERFACE Version 1.1 1 INTRODUCTION...

PRINTER SERVER 4.- Select Connect to a printer on the Internet or on a home or office network: and enter http://192.168.1.1:631/printe

PRINTER SERVER 5.- Select the brand of the printer that you want to connect to the router in the Manufacturer list of printers. 6.- Select the p

PRINTER SERVER 4-6 Version 1.1 10.- The following screen shows your current printer settings. Select Finish to complete adding a new printer.

1-1 Version 1.1 1 INTRODUCTION This document provides some indications about how to configure the VDSL2 ZyXEL P870HNU-51B, supplied as Telefonic

2 FACTORY DEFAULT SETTINGS The VDSL2 router supplied within the Home Station VDSL2 package is pre-configured by factory default settings in a dyna

FACTORY DEFAULT SETTINGS Figure 2-1: Router access The factory default values for the CPE Username and Password parameters are 1234 and 1234 respec

FACTORY DEFAULT SETTINGS Version 1.1 Figure 2-2: Web GUI main page In next section you will find how to make some basic operations using the web c