ZyXEL Communications P870HNU-51B Guia do Utilizador descarregar pdf (Página 15)

BASIC OPERATIONS ON THE ROUTER

Once completed these previous fields, press Next button in all the coming screens which

could appear, without modifying anything else, and press the bottom Apply/Save in the last

screen of the sequence to make the router saves the changes properly.

In the multiuser configurations, the NAT feature must be enabled. To check this, verify in

this previous screen that the NAT option is selected. If not, select the Enable NAT option.

MULTIUSER STATIC

Go to Network -> WAN -> Internet Connection to diplay the screen above in figure 3-3.

Now press on the Edit icon located under the Modify section. In the first screen displayed,

check that the NAT type is configured as IP over Ethernet. Then press the Next bottom. In the

new screen which will appear, it will be necessary to choose the option Use the following

Static IP address. It will be necessary to configure here the right values received for the

broadband line. Once completed these previous fields, press Next button in all the coming

screens which could appear, without modifying anything else, and press the bottom

Apply/Save in the last screen of the sequence to make the router saves the changes properly

Figure 3-5: WAN options configuration in multiuser static mode

In the multiuser configurations, the NAT feature must be enabled. To verify it, check in the

according screen from the above sequence where this parameter is configured, that the NAT

feature is enabled.

3-5

ersion 1.1

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Sem comentários

ZyXEL Communications P870HNU-51B Guia do Utilizador Página 15