Zyxel-communications NBG334SH Manual do Utilizador descarregar pdf (Página 203)

ZyXEL NBG-334SH User’s Guide

203

APPENDIX A

Product Specifications

The following tables summarize the ZyXEL Device’s hardware and firmware features.

Table 91 Hardware Features

Dimensions (W x D x H) 190 x 128 x 33 mm

Power Specification 12 V AC 1 A

Ethernet ports Auto-negotiating:

This auto-negotiation feature allows the ZyXEL Device to detect the speed

of incoming transmissions and adjust appropriately without manual

intervention. It allows data transfer of either 10 Mbps or 100 Mbps in either

half-duplex or full-duplex mode depending on your Ethernet network.

Auto-crossover:

Use either crossover or straight-through Ethernet cables.

4-Port Switch A combination of switch and router makes your ZyXEL Device a cost-

effective and viable network solution. You can add up to four computers to

the ZyXEL Device without the cost of a hub. Add more than four computers

to your LAN by using a hub.

Reset Button The reset button is built into the rear panel. Use this button to restore the

ZyXEL Device to its factory default settings.

Antenna The ZyXEL Device is equipped with a 2dBi fixed antenna to provide clear

radio transmission and reception on the wireless network.

Operation Temperature 0º C ~ 50º C

Storage Temperature -20º C ~ 60º C

Operation Humidity 20% ~ 95% RH

Storage Humidity 10% ~ 90% RH

Distance between the

centers of the holes on

the device’s back.

125 mm

Screw size for wall-

mounting

M 3*10

Table 92 Firmware Features

FEATURE DESCRIPTION

Default IP Address 192.168.1.1

Default Subnet Mask 255.255.255.0 (24 bits)

Default Password 1234

DHCP Pool 192.168.1.33 to 192.168.1.64

Device Management Use the web configurator to easily configure the rich range of features on

the ZyXEL Device.

1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 289 290

Sem comentários

Zyxel-communications NBG334SH Manual do Utilizador Página 203