
ZyWALL 10 Internet Security Gateway
System Information & Diagnosis 9-11
Figure 9-10 Menu 24.4 — System Maintenance — Diagnostic
Follow the procedure below to get to Menu 24.4 - System Maintenance – Diagnostic.
Step 1. From the main menu, select option 24 to open Menu 24 - System Maintenance.
Step 2. From this menu, select option 4. Diagnostic. This will open Menu 24.4 - System Maintenance -
Diagnostic.
9.4.1 WAN DHCP
DHCP functionality can be enabled on the LAN or WAN as shown in Figure 9-11. LAN DHCP has already
been discussed. The ZyWALL can act either as a WAN DHCP client (IP Address Assignment field in
menu 4 or menu 11.3 is Dynamic and the Encapsulation field in menu 4 or menu 11 is Ethernet) or
None, i.e., you have a static IP. The WAN Release and Renewal fields in menu 24.4 conveniently allow
you to release and/or renew the assigned WAN IP address, subnet mask and default gateway in a fashion
similar to winipcfg.
Menu 24.4 - System Maintenance - Diagnostic
TCP/IP
1. Ping Host
2. WAN DHCP Release
3. WAN DHCP Renewal
4. Internet Setup Test
System
11. Reboot System
Enter Menu Selection Number:
Host IP Address= N/A
Comentários a estes Manuais