Zyxel-communications NBG334W Manual do Utilizador descarregar pdf (Página 114)

Chapter 8 LAN

NBG334W User’s Guide

114

8.3 LAN IP Screen

Use this screen to change your basic LAN settings. Click Network > LAN.

Figure 60 Network > LAN > IP

The following table describes the labels in this screen.

8.4 LAN IP Alias

IP alias allows you to partition a physical network into different logical networks over the

same Ethernet interface. The NBG334W supports three logical LAN interfaces via its single

physical Ethernet interface with the NBG334W itself as the gateway for each LAN network.

To change your NBG334W’s IP alias settings, click Network > LAN > IP Alias. The screen

appears as shown.

Table 41 Network > LAN > IP

LABEL DESCRIPTION

LAN TCP/IP

IP Address Type the IP address of your NBG334W in dotted decimal notation 192.168.1.1

(factory default).

IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your

NBG334W will automatically calculate the subnet mask based on the IP address

that you assign. Unless you are implementing subnetting, use the subnet mask

computed by the NBG334W.

Apply Click Apply to save your changes back to the NBG334W.

Reset Click Reset to begin configuring this screen afresh.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 295 296

Sem comentários

Zyxel-communications NBG334W Manual do Utilizador Página 114