Zyxel-communications NBG334W Manual do Utilizador descarregar pdf (Página 168)

Chapter 16 Bandwidth Management

NBG334W User’s Guide

168

Configuration

16.10 Bandwidth Management Monitor

Click Management > Bandwidth MGMT > Monitor to open the bandwidth management

Monitor screen. View the bandwidth usage of the WAN configured bandwidth rules. This is

also shown as bandwidth usage over the bandwidth budget for each rule. The gray section of

the bar represents the percentage of unused bandwidth and the blue color represents the

percentage of bandwidth in use.

Figure 91 Management > Bandwidth MGMT > Monitor

LABEL DESCRIPTION

BW Budget Select Maximum Bandwidth or Minimum Bandwidth and specify the maximum

or minimum bandwidth allowed for the rule in kilobits per second.

Destination

Address

Enter the destination IP address in dotted decimal notation.

Destination

Subnet Netmask

Enter the destination subnet mask. This field is N/A if you do not specify a

Destination Address. Refer to the appendices for more information on IP

subnetting.

Destination Port Enter the port number of the destination. See Table 64 on page 163 for some

common services and port numbers.

Source Address Enter the source IP address in dotted decimal notation.

Source Subnet

Netmask

Enter the destination subnet mask. This field is N/A if you do not specify a Source

Address. Refer to the appendices for more information on IP subnetting.

Source Port Enter the port number of the source. See Table 64 on page 163 for some common

services and port numbers.

Protocol Select the protocol (TCP or UDP) or select User defined and enter the protocol

(service type) number.

OK Click OK to save your customized settings.

Cancel Click Cancel to exit this screen without saving.

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 295 296

Sem comentários

Zyxel-communications NBG334W Manual do Utilizador Página 168