Zyxel-communications P-2608HWL-Dx Series Manual do Utilizador descarregar pdf (Página 147)

100

101

P-2608HWL-Dx Series User’s Guide

Chapter 10 Network Address Translation (NAT) Screens 147

10.6 Address Mapping

Note: The Address Mapping screen is available only when you select Full Feature

in the NAT > General screen.

Ordering your rules is important because the ZyXEL Device applies the rules in the order that

you specify. When a rule matches the current packet, the ZyXEL Device takes the

corresponding action and the remaining rules are ignored. If there are any empty rules before

your new configured rule, your configured rule will be pushed up by that number of empty

rules. For example, if you have already configured rules 1 to 6 in your current set and now you

configure rule number 9. In the set summary screen, the new rule will be rule 7, not 9. Now if

you delete rule 4, rules 5 to 7 will be pushed up by 1 rule, so old rules 5, 6 and 7 become new

rules 4, 5 and 6.

To change your ZyXEL Device’s address mapping settings, click Network > NAT > Address

Mapping to open the following screen.

Figure 81 Address Mapping Rules

The following table describes the fields in this screen.

Apply Click Apply to save your changes back to the ZyXEL Device.

Cancel Click Cancel to begin configuring this screen afresh.

Table 49 Port Forwarding Rule Setup (continued)

LABEL DESCRIPTION

Table 50 Address Mapping Rules

LABEL DESCRIPTION

# This is the rule index number.

Local Start IP This is the starting Inside Local IP Address (ILA). Local IP addresses are N/A for

Server port mapping.

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 450 451

Comentários a estes Manuais

Sem comentários

Zyxel-communications P-2608HWL-Dx Series Manual do Utilizador Página 147

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Zyxel-communications P-2608HWL-Dx Series