Zyxel-communications P-335WT Manual do Utilizador descarregar pdf (Página 306)

P-335 Series User’s Guide

306 Chapter 27 Remote Node Configuration

Figure 156

Menu 11.1 - Remote Node Profile

Rem Node Name= MyISP Route= IP

Active= Yes

Encapsulation= Ethernet Edit IP= No

Service Type= Standard Session Options:

Service Name= N/A Edit Filter Sets= No

Outgoing:

My Login= N/A

My Password= N/A Edit Traffic Redirect= No

Retype to Confirm= N/A

Server= N/A

Relogin Every (min)= N/A

Press ENTER to Confirm or ESC to Cancel:

Menu 11.1 Remote Node Profile for Ethernet Encapsulation

The following table describes the fields in this menu.

Table 108 Menu 11.1 Remote Node Profile for Ethernet Encapsulation

FIELD DESCRIPTION

Rem Node Name Enter a descriptive name for the remote node. This field can be up to eight

characters.

Active Press [SPACE BAR] and then [ENTER] to select Yes (activate remote node) or

No (deactivate remote node).

Encapsulation Ethernet is the default encapsulation. Press [SPACE BAR] and then [ENTER] to

change to PPPoE or PPTP encapsulation.

Service Type Press [SPACE BAR] and then [ENTER] to select from Standard, RR-Toshiba

(RoadRunner Toshiba authentication method), RR-Manager (RoadRunner

Manager authentication method), RR-Telstra or Telia Login. Choose one of the

RoadRunner methods if your ISP is Time Warner's RoadRunner; otherwise

choose Standard.

Outgoing

My Login This field is applicable for PPPoE encapsulation only. Enter the login name

assigned by your ISP when the Prestige calls this remote node. Some ISPs

append this field to the Service Name field above (e.g., jim@poellc) to access the

PPPoE server.

My Password Enter the password assigned by your ISP when the Prestige calls this remote

node. Valid for PPPoE encapsulation only.

Retype to Confirm Type your password again to make sure that you have entered it correctly.

Server This field is valid only when RoadRunner is selected in the Service Type field.

The Prestige will find the RoadRunner Server IP automatically if this field is left

blank. If it does not, then you must enter the authentication server IP address

here.

Relogin Every

(min)

This field is available when you select Telia Login in the Service Type field.

The Telia server logs the Prestige out if the Prestige does not log in periodically.

Type the number of minutes from 1 to 59 (30 recommended) for the Prestige to

wait between logins.

Route This field refers to the protocol that will be routed by your Prestige – IP is the only

option for the Prestige.

Edit IP This field leads to a “hidden” menu. Press [SPACE BAR] to select Yes and press

[ENTER] to go to Menu 11.3 - Remote Node Network Layer Options.

1 2 ... 301 302 303 304 305 306 307 308 309 310 311 ... 508 509

Comentários a estes Manuais

Sem comentários

Zyxel-communications P-335WT Manual do Utilizador Página 306

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Zyxel-communications P-335WT