Zyxel-communications P-335WT Manual do Utilizador descarregar pdf (Página 376)

100

101

P-335 Series User’s Guide

376 Chapter 35 Firmware and Configuration File Maintenance

35.2.8 GUI-based TFTP Clients

The following table describes some of the fields that you may see in GUI-based TFTP clients.

Table 134 General Commands for GUI-based TFTP Clients

COMMAND DESCRIPTION

Host Enter the IP address of the Prestige. 192.168.1.1 is the Prestige’s default IP address

when shipped.

Send/Fetch Use “Send” to upload the file to the Prestige and “Fetch” to back up the file on your

computer.

Local File Enter the path and name of the firmware file (*.bin extension) or configuration file

(*.rom extension) on your computer.

Remote File This is the filename on the Prestige. The filename for the firmware is “ras” and for the

configuration file, is “rom-0”.

Binary Transfer the file in binary mode.

Abort Stop transfer of the file.

35.3 Restore Configuration

This section shows you how to restore a previously saved configuration. Note that this

function erases the current configuration before restoring a previous back up configuration;

please do not attempt to restore unless you have a backup configuration file stored on disk.

FTP is the preferred method for restoring your current computer configuration to your Prestige

since FTP is faster. Please note that you must wait for the system to automatically restart after

the file transfer is complete.

Note: WARNING! Do not interrupt the file transfer process as this

may PERMANENTLY DAMAGE YOUR Prestige.

35.3.1 Restore Using FTP

For details about backup using (T)FTP please refer to earlier sections on FTP and TFTP file

upload in this chapter

1 2 ... 371 372 373 374 375 376 377 378 379 380 381 ... 508 509

Comentários a estes Manuais

Sem comentários

Zyxel-communications P-335WT Manual do Utilizador Página 376

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Zyxel-communications P-335WT