Zyxel-communications P-660HW-Dx v2 Manual do Utilizador

P-660HW-Dx v2802.11g Wireless ADSL2+ 4-port GatewayQuick Start GuideVersion 3.403/2007Edition 1

P-660HW-Dx v2 Quick Start Guide107.2 Enabling OTISTTo enable OTIST on the P-660HW-Dx v2, you can either use the wizard (see section 3) or hold in the

P-660HW-Dx v2 Quick Start Guide11• Click the wizard icon ( ). Run the Internet/Wireless Setup wizard again. Check whether you can access the Interne

P-660HW-Dx v2 Quick Start Guide2OverviewThe P-660HW-Dx v2 is a wireless ADSL router with a four-port built-in switch.This Quick Start Guide shows you

P-660HW-Dx v2 Quick Start Guide31 Hardware Connections 1DSL: Use the gray telephone wire to connect your P-660HW-Dx v2’s DSL port to a telephone jack

P-660HW-Dx v2 Quick Start Guide4•The POWER light blinks while your P-660HW-Dx v2 starts up and stays on once it is ready. • Each ETHERNET light stays

P-660HW-Dx v2 Quick Start Guide52 Type the admin password 1234 (default). Click Login. Note: If your browser does not display the login screen, see T

P-660HW-Dx v2 Quick Start Guide64 If no ISP settings are detected, click next to go to the following screen. Enter your Internet connection informatio

P-660HW-Dx v2 Quick Start Guide71 Select Active and click Next to continue. It is strongly recommended that Enable OTIST is NOT selected. See section

P-660HW-Dx v2 Quick Start Guide84 Check your configuration and write down your wireless LAN settings for later use. Click Finish to complete and save

P-660HW-Dx v2 Quick Start Guide9Note: The fields available in this screen depend on the Mode and Encapsulation you select5 If you still cannot access