Zyxel-communications WPA-1000 Manual do Utilizador descarregar pdf (Página 58)

Chapter 5 Troubleshooting

WPA-1000 User’s Guide

5.5 Resetting the WPA-1000 to Its Factory Defaults

If you reset the WPA-1000, you lose all of the changes you have made. The WPA-1000 re-

loads its default settings. Default settings include:

• Password of conference control host and administrator: 1234

•SSID: ZyXEL

• Server IP: 192.168.1.10

• WEP: disabled

• Gatekeeper: All Block

• Resolution: 1024 by 768

• Color depth: 32bit

• Refresh rate: 60Hz

" You will lose all of your changes when you push the RESET button.

To reset the WPA-1000,

1 Make sure the STATUS LED is on and not blinking.

2 Use a pointed device such as a pen to press the RESET button in for 30 seconds. Turn the

device on and off.

3 Release the RESET button when the STATUS LED begins to blink.

4 When the WPA-1000 restarts automatically, wait for the WPA-1000 to finish restarting,

and log in to the web configurator. The default settings have been restored.

If the WPA-1000 does not restart automatically,

disconnect and reconnect the WPA-1000’s

power. Then, follow the directions above again.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 159 160

Sem comentários

Zyxel-communications WPA-1000 Manual do Utilizador Página 58