ZyXEL Communications GS3700 Series Guia do Utilizador descarregar pdf (Página 99)

Chapter 7 VLAN

GS3700/XGS3700 Series User’s Guide

The following table describes the labels in this screen.

7.5.6.2 Create an IP-based VLAN Example

This example shows you how to create an IP VLAN which includes ports 1, 4 and 8. Follow these

steps using the screen below:

1 Activate this protocol based VLAN.

2 Type the port number you want to include in this protocol based VLAN. Type 1.

3 Give this protocol-based VLAN a descriptive name. Type IP-VLAN.

4 Select the protocol. Leave the default value IP.

5 Type the VLAN ID of an existing VLAN. In our example we already created a static VLAN with an ID

of 5. Type 5.

Table 34 Advanced Application > VLAN > VLAN Port Setting > Protocol Based VLAN Setup

LABEL DESCRIPTION

Active Select this check box to activate this protocol based VLAN.

Port Type a port number to be included in this protocol based VLAN.

This port must belong to a static VLAN in order to participate in a protocol based VLAN. See

Chapter 7 on page 87 for more details on setting up VLANs.

Name Enter up to 32 alphanumeric characters to identify this protocol based VLAN.

Ethernet-type Use the drop down list box to select a predefined protocol to be included in this protocol

based VLAN or select Others and type the protocol number in hexadecimal notation. For

example, the IP protocol in hexadecimal notation is 0800, and Novell IPX protocol is 8137.

Note: Protocols in the hexadecimal number range of 0x0000 to 0x05ff are not allowed to be

used for protocol based VLANs.

VID Enter the ID of a VLAN to which the port belongs. This must be an existing VLAN which you

defined in the Advanced Application > VLAN > Static VLAN screen.

Priority Select the priority level that the Switch will assign to frames belonging to this VLAN.

Add Click this to create a new entry or to update an existing one.

This saves your changes to the Switch’s run-time memory. The Switch loses these changes

if it is turned off or loses power, so use the Save link on the top navigation panel to save

your changes to the non-volatile memory when you are done configuring.

Cancel Click Cancel to begin configuring this screen afresh.

Index This is the index number identifying this protocol based VLAN. Click on any of these

numbers to edit an existing protocol based VLAN.

Active This field shows whether the protocol based VLAN is active or not.

Port This field shows which port belongs to this protocol based VLAN.

Name This field shows the name the protocol based VLAN.

Ethernet-type This field shows which Ethernet protocol is part of this protocol based VLAN.

VID This field shows the VLAN ID of the port.

Priority This field shows the priority which is assigned to frames belonging to this protocol based

VLAN.

Delete Click this to delete the protocol based VLANs which you marked for deletion.

Cancel Click Cancel to begin configuring this screen afresh.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 415 416

Sem comentários

ZyXEL Communications GS3700 Series Guia do Utilizador Página 99