
Chapter 9 802.1x
MES-2110 User’s Guide
70
9.5 802.1x Radius Server Configuration Screen
Use this screen to view a summary of port authentication settings on the Switch
and in each individual ports.
Click Configuration > 802.1x > 802.1x Status in the navigation panel to
display the screen as shown.
Figure 34 Configuration > 802.1x Status
The following table describes the labels in this screen.
Table 17 Configuration > 802.1x Status
LABEL DESCRIPTION
802.1x This shows if port authentication is enabled on the Switch.
Guest VLAN This shows if a Guest VLAN is enabled on the Switch.
Reauth-Max This shows the number of times the Switch attempts to authenticate
clients for port access.
Server IP
Address
This is the IP address of the RADIUS server.
Server
Shared Key
This is the password shared between the external authentication server
and the Switch.
Server UDP
Port Number
This is the port number of the RADIUS server.
Server
Accounting
Port Number
This is the port number of the external accounting server.
Server Time-
Out
This shows how many minutes a session can be idle before the session
times out.
When a session times out, the client has to send a new request to the
server and be authenticated again.
The table below describes the settings for ports 1-10
Active
This shows if port authentication is enabled on the port.
Comentários a estes Manuais