ZyXEL Communications P-334WT Informações Técnicas descarregar pdf (Página 199)

● EAP-Packet : Both the supplicant and the authenticator send this packet when authentication is taking place. This is the packet

that contains either the MD5-Challenge or TLS information required for authentication.

● EAPOL-Start : This supplicant sends this packet when it wants to initiate the authentication process.

● EAPOL-Logoff : The supplicant sends this packet when it wants to terminate its 802.1x session.

● EAPOL-Key : This is used for TLS authentication method. The Wireless AP uses this packet to send the calculated WEP key to

the supplicant after TLS negotiation has completed between the supplicant and the RADIUS server.

IEEE 802.1x Configuration in ZyXEL Wireless Access Point

● Enable 802.1x in AP

When the IEEE 802.1x authentication is enabled, the wireless client must be authenticated by the ZyXEL AP before it can

communicate on your network through ZyXEL AP. By default, the 802.1x function is disabled (Authentication Control= Force

Authorized) to allow all wireless client. You can use SMT or Web Configuration to configure it.

Enter SMT Menu 23.4 to setup the 802.1x authentication control.

Menu 23.4 - System Security - IEEE802.1X

Authentication Control= Auto/ Force Authorized/ Force UnAuthorized

ReAuthentication Timer (in second)= 1800

Key Settings :

Option Descriptions

1 2 ... 194 195 196 197 198 199 200 201 202 203 204 ... 294 295

Sem comentários

ZyXEL Communications P-334WT Informações Técnicas Página 199