ZyXEL Communications P-334WT Informações Técnicas descarregar pdf (Página 53)

You must first install TCP/IP software on each PC before you can use it for Internet access. If you have already installed TCP/IP,

go to the next section to configure it; otherwise, follow these steps to install:

● In the Control Panel/Network window, click Add button.

● In the Select Network Component Type windows, select Protocol and click Add.

● In the Select Network Protocol windows, select Microsoft from the manufacturers, then select TCP/IP from the Network

Protocols and click OK.

3. TCP/IP Configuration

Follow these steps to configure Windows TCP/IP:

● In the Control Panel/Network window, click the TCP/IP entry to select it and click Properties button.

● In the TCP/IP Properties window, select Obtain an IP address automatically.

Note: Do not assign arbitrary IP address and subnet mask to your PCs, otherwise, you will not be able to access the Internet.

● Click the WINS configuration tab and select Disable WINS Resolution.

● Click the Gateway tab. Highlight any installed gateways and click the Remove button until there are none listed.

● Click the DNS Configuration tab and select Disable DNS.

● Click OK to save and close the TCP/IP properties window

● Click OK to close the Network window. You will be prompted to insert your Windows CD or disk. When the drivers are

updated, you will be asked if you want to restart the PC. Make sure your Prestige is powered on before answering Yes to the

prompt. Repeat the above steps for each Windows PC on your network.

● Setting up the Prestige router

The following procedure is for the most typical usage of the Prestige where you have a single-user account (SUA). The Prestige

supports embedded web server that allows you to use Web browser to configure it. Before configuring the router using Browser

please be sure there is no Telnet or Console login.

1. Retrieve Prestige Web

Please enter the LAN IP address of the Prestige router in the URL location to retrieve the web screen from the Prestige. The default

LAN IP of the Prestige is 192.168.1.1. See the example below.

2. Login first

To restrict only the adminstrator can configure the router, there is a login procedure prompted for asking User Name and Password.

The default User Name is 'admin' and the default password is the default SMT password, '1234'.

3. Configure Prestige for Internet access by using WIZARD SETUP. The Web screen shown below takes PPPoE as the example.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 294 295

Sem comentários

ZyXEL Communications P-334WT Informações Técnicas Página 53