ZyXEL Communications ZYWALL 5 - V4.04 Guia do Utilizador descarregar pdf (Página 49)

ZyXEL Confidential

404XD3C0.docx

49/181

17. [FEATURE CHANGE]

Add switch on/off user configuration into CF report service.

The CLI command is:

For projects have multi profile: "ip cf externalDB enableLog [on |off]"

For projects do not have multi profile: ip urlfilter webControl enableLog [on |off]"

18. [BUG FIX] SPR ID: 070612602

Symptom: Can't see the site on the public DMZ from Internet

Topology: PC1---(LAN)-+ +-(WAN1)---Internet-----PC3

| |

+-ZyWALL-+

| |

PC2---(DMZ)-+ +-(WAN2)---Internet

Condition:

The NAT setup of WAN 1 is full feature, and NAT setup of WAN 2 is SUA.

Can't see the site on the public DMZ from Internet

(1) Set LAN to 192.168.1.1/24, DMZ to a public subnet.

(2) Add a static route to let PC3 can routing to PC2 from WAN1.

(3) WAN1 and WAN2 all active and have public IP addresses.

(4) Set WAN1 NAT to Full Feature and modify the first defaul NAT rule to:

# Local Start IP Local End IP Global Start IP Global End IP Type

1 192.168.1.1 192.168.1.254 0.0.0.0 N/A M-1

(5) Set WAN2 NAT to SUA.

(6) PC3 Ping PC2 will failed.

19. [BUG FIX] SPR ID: 070228410

Symptom: ZyWALL35 BW MGMT class search order shows wrong when moving

classes.

Condition:

(1) Load romfile(password:fenris120) from SPR, go to Class Setup under WAN1.

(2) Add sub-class FTP, bandwidth budget 180k, priority:5, service type:FTP.

(3) Add sub-class PC1, bandwidth budget 150k, priority:4, borrow,service

type:custom, Source IP:single 192.168.1.37.

(4) Cannot move class 1 to 2.

20. [ENHANCEMENT]

Symptom: Modem initializations process cannot finish, LG-340E CDMZ Wireless

phone

Topology: PC-----(LAN)ZyWALL (AUX0)---- LG-340E CDMA Wireless phone

Condition:

(1) Connect this CDMA phone(LG-340E) to my PC directly (Baud rate 115200)

(2) Key in the AT commands "AT OK AT+CRM=1 OK AT$LGPKT=3 OK

ATDT#777 CONNECT"

(3) ZyWALL print message ※AUX Port init Done Modem Init Failed!!!§ in console.

21. [BUG FIX] SPR ID: 070619162

Symptom: BM for SIP doesn't work on WAN interface

Condition:

(1) Add a BM filter for SIP on WAN interface.

(2) Enable SIP ALG.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 180 181

Comentários a estes Manuais

Sem comentários

ZyXEL Communications ZYWALL 5 - V4.04 Guia do Utilizador Página 49

Comentários a estes Manuais

Manuais e produtos relacionados com Redes ZyXEL Communications ZYWALL 5 - V4.04