
As a configuration example, we are going to use the tool developed by
AsokaUSA for its easy implementation and its user-friendly user interface. Once the
Power Manager tool is started, it offers a choice of network interfaces which will be
used by the program as illustrated in Figure 9.11.
The installation program then starts with the installation of the driver required
for good operation of the frames sent to the PLC devices as illustrated in Figure
9.12.
Once the installation program is started, it carries out several steps until the
installation of the Power Manager PLC tool is completed (see complete Figure
9.13).
Once the installation is completed, the Power Manager tool prompts to rename
the PLC device to which the installation PC is connected (see Figure 9.14) and to
Configuring a HomePlug AV Network 189
Figure 9.10 HomePlug AV PLC device association principle with the EasyConnect mode
Figure 9.11 Network interface choice
Comentários a estes Manuais