Zyxel-communications P-334WHD Manual do Utilizador descarregar pdf (Página 171)

P-334WHD User’s Guide

Chapter 15 Bandwidth Management 171

15.9.2 Rule Configuration with the User-defined Service

In addition to the pre-defined services, if you want to edit a bandwidth management rule for

other applications and/or subnets, click the Edit icon in the User-defined Service table of the

Advanced screen. The following screen displays.

Figure 94 Bandwidth Management Rule Configuration: User-defined Service

The following table describes the labels in this screen.

Table 72 Bandwidth Management Rule Configuration: User-defined Service

LABEL DESCRIPTION

BW Budget Select Maximum Bandwidth or Minimum Bandwidth and specify the maximum

or minimum bandwidth allowed for the rule in kilobits per second.

Destination

Address

Enter the destination IP address in dotted decimal notation.

Destination

Subnet Netmask

Enter the destination subnet mask. This field is N/A if you do not specify a

Destination Address. Refer to the appendices for more information on IP

subnetting.

Destination Port Enter the port number of the destination. See Table 67 on page 164 for some

common services and port numbers.

Source Address Enter the source IP address in dotted decimal notation.

Source Subnet

Netmask

Enter the destination subnet mask. This field is N/A if you do not specify a Source

Address. Refer to the appendices for more information on IP subnetting.

Source Port Enter the port number of the source. See Table 67 on page 164 for some common

services and port numbers.

Protocol Select the protocol (TCP or UDP) or select User defined and enter the protocol

(service type) number.

OK Click OK to save your customized settings.

Cancel Click Cancel to exit this screen without saving.

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 299 300

Sem comentários

Zyxel-communications P-334WHD Manual do Utilizador Página 171