Zyxel-communications P-334WHD Manual do Utilizador descarregar pdf (Página 69)

P-334WHD User’s Guide

Chapter 3 Connection Wizard 69

3.5 Connection Wizard: STEP 4: Bandwidth management

Bandwidth management allows you to control the amount of bandwidth going out through the

ZyXEL Device’s WAN, LAN or WLAN port and prioritize the distribution of the bandwidth

according to the traffic type. This helps keep one service from using all of the available

bandwidth and shutting out other users.

Figure 33 Wizard Step 4: Bandwidth Management

The following fields describe the label in this screen.

Table 28 Wizard Step 4: Bandwidth Management

LABEL DESCRIPTION

Enable BM for all traffic

automatically

Select the check box to have the ZyXEL Device apply bandwidth

management to traffic going out through the ZyXEL Device’s WAN, LAN or

WLAN port. Bandwidth is allocated according to the traffic type

automatically. Real-time packets, such as VoIP traffic always get higher

priority.

Back Click Back to return to the previous screen.

Next Click Next to continue.

Exit Click Exit to close the wizard screen without saving.

First DNS Server

Second DNS Server

Third DNS Server

Enter the DNS server's IP address in the fields provided.

If you do not configure a system DNS server, you must use IP addresses

when configuring DDNS and the time server.

Back Click Back to return to the previous screen.

Next Click Next to continue.

Exit Click Exit to close the wizard screen without saving.

Table 27 Wizard Step 3: WAN IP and DNS Server Addresses for the Backup WAN

LABEL DESCRIPTION

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 299 300

Sem comentários

Zyxel-communications P-334WHD Manual do Utilizador Página 69