Zyxel-communications PLA401 v2 Manual do Utilizador descarregar pdf (Página 7)

ENGLISH

4 While the devices are connecting, the power ( ) and

HomePlug ( ) lights blink. Also several times all lights

blink at the same time and the HomePlug ( ) light shows

red.

5 Wait for about one minute while your powerline devices

connect. The power ( ) light is steady when the

ENCRYPT process times out, the HomePlug ( ) light is

steady if you have a successful connection.

V If the power ( ) light does not blink, you have

probably pressed the ENCRYPT button for too

long. Try again, pressing the ENCRYPT button

for 1~2 seconds.

V If the HomePlug ( ) lights on both powerline

devices do not light up, the powerline devices

are not connected. Repeat steps 2 and 3 in this

section. If that doesn’t work, see the User’s

Guide for more suggestions.

6 To add another powerline device (C) to your network,

connect it with one of the powerline devices (A or B)

1 2 3 4 5 6 7 8 9 10 11 12 ... 57 58

Sem comentários

Zyxel-communications PLA401 v2 Manual do Utilizador Página 7