ZyXEL Communications P-660H - VERSION 3.40 Manual do Utilizador descarregar pdf (Página 10)

ZyXEL Confidential

Modifications in V 3.40(AGD.1)b2 | 01/04/2006

1 .[BUG FIXED] SPRID: 051227495

Symptom: In GUI,help page error

Condition: In GUI,Advanced Setup-＞UPnP help page is error.Wizard Setup-＞Media Bandwidth Mgnt

help page cant open

2 . [BUG FIXED] SPRID: 051226451

Symptom: NAT erro message doesn’t correct

Condition:step1:Menu15.1.1,edit ”many to many no overload”rule.Local

IP:start=192.168.1.33,end=192.168.1.39.Global IP:start=17.2.5.12,end=17.2.5.16.step2:It show error

message”The end IP address must be great than the start IP address”,but the correct is”IGA and ILA does

not match”

Modifications in V 3.40(AGD.1)b1 | 12/22/2005

1 .[BUG FIXED] SPRID:051220117

Symptom: WEB/GUI will show "Duplicate IP address to other node's IP address." error message when

configuring WAN page Condition: 1 Set two remote node( dynamic get IP) in SMT memu 11.1 and 11.2

2 and then Set Wan parameter in GUI

2. [BUG FIXED] SPRID:051220118

Symptom：PPPoA idle time issue

Condition1: 1. PPPoA and LAN PC ping WAN PC continuously 2. Reboot device ,it can not connection to

the remote node Conditon2: 1. PPPoA and choose nail-up yes 2. in SMT-4 or SMT-11 change between two

right accounts ,device can not connect to remote node

3. [BUG FIXED] SPRID:051220120

Symptom: choose PPPoA encapsulation to sync up,when need to retype username and password

the IE url show "ZCfgPPPoE.html" webpage

Condition:choose PPPoA encapsulation to sync up,when need to retype username and password the IE url

show "ZCfgPPPoE.html" webpage

4. [BUG FIXED]

SPRID:051220122

Symptom: MIB Browser timeout but it still can set "sysName".

Condition: Step 1: Set with CI command "sys romr" and choose setting to "y" in menu 24.8 to reset default

romfile .

Step 2: Edit SMT menu 22 to set Get Community = 123456 and Set Community =123456,Trusted Host =

0.0.0.0,Trap Community = 123456 , Destination = 192.168.1.33(LAN set PC IP address).

Step 3: Don’t exit SMT.

Step 4: To MIB Tree/iso/org/dod/internet/mgmt/mib-2/system/sysName, then choose "Set"function -->To

"Value to Set" Item, key in "AAA" --> press "Set Value in Remote SNMP Agent" button.

Step 5: When request time out, the information can still be stored.

5. [BUG FIXED]SPRID: 051220127

Symptom: Upload wrong romfile by SMT Restore Configuration may cause device crash.

Condition: If the upload romfile is text format or wrong content binary image, after restore from

SMT 24.6, the device may crash.

6. [BUG FIXED] SPRID: 051220129

Symptom: Change the LAN IP or subnet mask,IE can't access device.

Condition: In web wizard - LAN page. Change LAN IP for 192.168.1.1 to 192.168.181.1, the PC get IP

from the device but can't use IE to access device.

7. [BUG FIXED] SPRID: 051220131

Symptom: CI command "sys stdio" does not follow the spec.

Condition: Enter "sys stdio 4 30", it will set the timeout to 30 seconds.

8. [BUG FIXED] SPRID: 051220132

Symptom: In “many to many no overload” mode, IGA and ILA does not match, but it can save in EWC.

Condition: Step 1: In the SMT menu 15.1.1, edit one rule, choose the type “many to many no overload”, if

the number of local IP is not equal to the number of global IP, there is error information “IGA and ILA

does not match” and the setting can’t be saved. Step 2: In the GUI setting, if the number of local IP is not

equal to the number of global IP, there is no error, and in the SMT menu 15 the setting has been saved.

9. [BUG FIXED] SPRID: 051220133

Symptom: It can't escape SMT24.1

Page 10 of 12

1 2 ... 5 6 7 8 9 10 11 12

Comentários a estes Manuais

Sem comentários

ZyXEL Communications P-660H - VERSION 3.40 Manual do Utilizador Página 10

Comentários a estes Manuais

Manuais e produtos relacionados com Redes ZyXEL Communications P-660H - VERSION 3.40