ZyXEL Confidential
Condition: When performing vc-hunt process
10. [BUG FIXED]SPRID: 051220134
Symptom: eWC timeout but telnet port still can save change.
Condition:step1.eWC in remote management.step2.change telnet port 23 to 23023 and wait 3 minutes.
step3.apply it.step4 turn on login face and login step5.in remote management the telnet port have
changed frome23 to 23023.
11. [BUG FIXED]SPRID: 051220135
Symptom: While set the DUT LAN ¨Client IP Pool Starting Address〃 and ¨Size of Client IP Pool〃
which are not match the ¨IP Subnet Mask〃, but this can be saved in GUI\Wizard Setup and rom-t.
Condition: Step1: While set the DUT LAN setting as below: ¨ Client IP Pool Starting
Address=192.168.1.4〃, Size of Client IP Pool=4〃, ¨IP Subnet Mask=255.255.255.248〃, the DUT
will show a prompt in SMT and GUI/Advanced Setup: ¨Invalid DHCP Size of Client Pool〃.
Step2: But in GUI/Wizard Setup and rom-t, this configuration will be saved, and LAN PC can get the IP
from 192.168.1.4.
12. [BUG FIXED]SPRID: 051220136
Symptom: The”Connection testing”page will change to”conncetion testing fail”Page for only one brower.
condition: 1.If there are no correct PVC in hunting table.2.Page will return to”Auto_Hunt_Fail”.
3.If there are two or more browers,only one page will display”Auto_Hunt_Fail”,the other pages will also
display”Connection testing”.
13. [BUG FIXED]
SPRID: 051220137
symptom:device will be crash
condition: 1.set default romfile
2.in vc hunt table have vpi/vci=0/33
3.turn on vc hunt debug flag
14.[BUG FIXED]SPRID: 051220138
Symptom: Confgure firewall will cause DUT crash.
Condition: In GUI->advanced setup ->firewall->rule summary,create a rule and apply it ,then enter the
rule and delete it,click back button in IE column and apply it again ,the DUT will crash.
15. [BUG FIXED]SPRID: 051220139
Symptom: In EWC ISP's name can accecpt special characters which is not accordant with SMT.
Condition: In SMT menu 4 the ISP’s name can not accept special characters such as #$%^,but in eWC
can accept it.
16. [BUG FIXED] SPRID: 051220140
Symptom: eWC time out but can reset DUT to the factory default.
Condition: Step1 enter eWC->maintenance->firmware Step2 enter SMT menu 24.8 CI command"sys
reboot" Step3 after DUT startup click the reset button in eWC then can reset DUT to the factory default
17. [BUG FIXED] SPRID: 051220141
Symptom: Users can not login in prestige device if they use IE in Mac OS as browser.
Condition: Browser is IE on Mac OS
18. [Feature Enhancement]
Add Quick Route feature
19. change default romfile :quick route default run in task mode.
20 .[Feature Enhancement] (Triple play V1 for ADM6996I )
support Triple play v1 in switch chip ADM6996I
21.change datapump to 4.2.1.0
Modifications in V 3.40(AGD.0)C0 | 11/02/2005
1. Change to FCS version.
Modifications in V 3.40(AGD.0)b3 | 10/27/2005
1[BUGFIXED]
SPRID: 051025814
Symptom: enable upnp will cause the DUT crash.
Condition: step1 enter eWC upnp, enable upnp
step2 enter other page such as NAT then the DUT will crash.
step3 This phenomenon will appear on some PC, but the frequency is very high.
Page 11 of 12
(408 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais