ZyXEL Communications Prestige 630-C series Guia do Utilizador descarregar pdf (Página 52)

Prestige 630 ADSL USB Modem

5-2 ADSL Control and Status Interface

After the first access, just double-click the System Tray icon (in the bottom right-hand corner) to open the

ADSL Control and Status interface.

5.2 Modem Performance

Two bar graphs indicate the throughput rates. One indicates the transmit rate (upstream) and the second

indicates the receive rate (downstream).

5.3 Connection Status

This field reads “ADSL link connected” when the ADSL line is connected to a DSLAM and “ADSL link

disconnected” when the ADSL is not connected to a DSLAM.

5.4 Device Status

This field reads “ADSL modem available” when the modem is properly connected to the computer and the

modem driver is installed. The field reads “ADSL modem not available” when the modem is not connected

to the computer or the modem driver is not properly installed.

5.5 Connect

The connect/disconnect functions are controlled by the Connect/Disconnect button. The button is disabled

when the modem is unavailable. This happens when the modem driver fails to communicate properly or is

disabled.

The status of the modem determines the button text. Connect is displayed when the modem is not connected

and not cycling in order to connect. Disconnect is displayed when the modem is connected.

5.6 Close

The Close button closes only the main interface screen and does not have any affect on the ADSL

connection. You can re-open the main interface screen through double-clicking the system tray icon.

Terminating the application removes the system tray icon. Restart the ADSL Control and Status interface

by clicking StartProgramsSettings and then double-clicking on the ADSL Control and Status icon.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 67 68

Sem comentários

ZyXEL Communications Prestige 630-C series Guia do Utilizador Página 52